Guide to Beer Keg Taps
We can always find beer kegs during parties or picnics with our family and friends. People who are thirsty drink a lot and so it is very cost effective to have a keg in the available since it also saves you a lot of money. IF you have a keg tap, this device will allow you to release the beer into your drinking cup from the keg. It is easy to use a keg tap but you must be careful not to waste beer if you are not sure how to do it correctly. You can splash foam all over you or all over your face. You would see people doing this but it is not as easy as it looks.
The release of the beer is regulated by the keg tap. This uses a lever and through pulling and pressing it, the beer is released. You can get you beer when the pressure is released and it pushes the beer up to your glass. Keg taps work like switches which you can put on or off or it can also be an open-close switch.
With the beer key directly In front of you, you need to place the beer keg in a stead position for a short while so that the foam it creates when pouring is minimized. Foam build up is the result of too much movement when the keg is being transported. Let it stay for a while and place the keg where you plan to serve the beer to minimize the foam. Remove the cap or seal since it will be harder to tap with it. However, the pros do not remove the cap or seal because they will not put the beer at risk like you will. If you will do it, you need to play it safe.
With a portable keg system, you tap with CO2. Party pump is when pressure is receive by the keg in a single unit pump and tap combination. The beer keg tap is separated from the keg. To release the pressure in the ked, the pump is attached and the faucet is opened. Pumping gives air pressure into the keg, and a push on the lever, which is the tap handle that releases beer.
A pony keg or portable beer keg should be consumed in one day because the beer loses its flavor once the air is mixed with the beer. Traditional keg uses an on and off valve. This traditional keg does not need air pressure since it works using gravity. In this type, you can get your beer by sampling opening or closing the keg when the valve is used.